2-Flute · Uncoated · Aluminium · Standard Reach

14mm 2-Flute Uncoated Solid Carbide Square End Millfor Aluminium & Non-Ferrous Machining

Uncoated (bright polished) solid carbide with mirror-finish flutes specifically engineered for aluminium and non-ferrous alloys. The absence of coating eliminates the micro-adhesion that causes built-up edge (BUE) on soft metals — cutting is cleaner, chips evacuate freely, and surface finish is superior. The 2-flute geometry provides large chip gullets for maximum swarf clearance at high spindle speeds (up to 30,000 RPM in aluminium). Use with air blast or light oil mist.

D1 14mmL2 65mmD2 14mmOAL 150mm2 FlutesUncoated CoatingNon-FerrousStandard ReachMOQ 1 pc

Get Pricing & Stock

Richtpreis

216,51 €

Richtpreis Werk (EUR)

Basierend auf Stabmaterial-Stand per 2026-03-31. Endgültiges Angebot kann abweichen.

Uncoated · 2 Flute · Aluminium

14mm 2F Uncoated Square EM

L2 65mm · D2 14mm · OAL 150mm

Standard Reach · Aluminium

WhatsApp Quote Email RFQUse contact form →

✓ Factory direct pricing

✓ MOQ 1 piece, ships 1–5 days

✓ Custom OAL and helix available

Full Dimensions

Technical Specifications

Cutter Diameter (D1 h7)14 mm
Flute Length (L2)65 mm
Shank Diameter (D2 h6)14 mm
Overall Length (L1)150 mm
Number of Flutes2
CoatingUncoated Bright polished
Max Material HardnessN/A (non-ferrous optimised)
Reach CategoryStandard (L1/D1 = 10.7×)
Helix Angle30°–45° (application dependent)
End GeometrySquare (flat end)
SubstrateK10/K20 Ultra-Fine Grain Carbide
Shank Toleranceh6
MOQ1 piece
Lead Time (standard)1–5 business days
Lead Time (custom)5–15 business days

Uncoated · 2 Flute · Aluminium

14mm 2-flute Uncoated solid carbide square end mill — L2=65mm OAL=150mm
D1 h7
14mm
L2
65mm
D2 h6
14mm
L1
150mm
Flutes
2
Reach
Standard

Where This Tool Excels

14mm Uncoated 2F — Recommended Applications

  • ▸Large mould and die cavity machining
  • ▸Structural component pocketing
  • ▸Gearbox and transmission case features
  • ▸Wind turbine component contouring
Machining Tip: ø14mm produces significant cutting forces. Ensure workholding clamping force is adequate. In aluminium alloy, reduce axial DOC to 0.5×D for first passes to verify fixturing stability before committing to full depth.

Coating Performance

Uncoated — Why It Works

  • ▸Bright polished finish — zero micro-adhesion on aluminium
  • ▸Eliminates built-up edge (BUE) in soft metals
  • ▸Superior chip evacuation at high spindle speeds
  • ▸Recommended with air blast or light oil mist
  • ▸Mirror surface finish on aluminium: Ra < 0.4µm achievable
ISO N2 flute aluminium end milluncoated carbide end mill aluminiumbright finish end mill non-ferrous2 flute end mill copper brass

Same Diameter, Different Reach

ø14mm Uncoated · 2 Flute · Aluminium — Other Flute Lengths

L2 35mm
OAL 80mm · Standard
L2 45mm
OAL 100mm · Standard
L2 60mm
OAL 200mm · Standard

Same Size, Different Coating

ø14mm / L2 65mm — Other Variants

TiSiN · 4 Flute · HRC55
TiSiN · 4 Flute · HRC55
HRC55 · 4F
TiSiN · 2 Flute · HRC55
TiSiN · 2 Flute · HRC55
HRC55 · 2F
Uncoated · 3 Flute · Aluminium
Uncoated · 3 Flute · Aluminium
Non-Ferrous · 3F
nACo · 4 Flute · HRC65
nACo · 4 Flute · HRC65
HRC65 · 4F
ø14mm / L2 45mm← All Square End Millsø14mm / L2 60mm

Order 14mm 2-Flute Uncoated Today

Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.

WhatsApp NowContact Form