JCD Insert · ø21.0–21.9mm · 140° Point
HCD-21.0-21.9
JCD Solid Carbide Drill Insert · ø21.0–21.9mm
Solid carbide JCD replaceable drill insert for the modular drill system. Fits all four shank depth ratios (3D / 5D / 8D / 10D) — one insert consumable covers your entire depth range. Insert change under 30 seconds with a single Torx key.
ø21.0–21.9mm140° PointCoolant ø5mmFits 3D·5D·8D·10DTiAlN CoatingMOQ 1 pc
Get Pricing & Stock
HCD-21.0-21.9
ø21.0–21.9mm · 140°
✓ Factory direct pricing
✓ MOQ 1 piece, stock sizes ship 1–5 days
✓ Compatible with 4 shank configurations
Full Specifications
Technical Specifications
| Product Code | HCD-21.0-21.9 |
| Cutting Diameter (D) | ø21.0–21.9 mm |
| Coolant Hole Dia (d) | 5 mm |
| Point Angle (a) | 140° |
| Number of Cutting Edges | 2 |
| Coating | TiAlN / TiSiN Oerlikon Balzers BALINIT® |
| Substrate | K10/K20 Solid Carbide 10% Co binder |
| Clamping Method | Single Torx screw |
| Insert Change Time | < 30 seconds |
| Compatible Shank Ratios | 3D · 5D · 8D · 10D |
| Coolant Delivery | Internal through-coolant up to 80 bar |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
Insert — Dimensional View
D (range)
ø21.0–21.9
Coolant d
ø5
Point a
140°
Shanks
3D–10D
Coating
TiAlN
MOQ
1 piece
Application Context
Where HCD-21.0-21.9 Excels
- ▸Engine blocks and cylinder heads
- ▸Rail vehicle bogie frames
- ▸Large structural fabrications
- ▸Heavy engineering components
Procurement Note: Insert ø19–23.9mm are paired with C25 shanks. Point angle is 140° for all — optimal for steel and cast iron without pre-spotting.
System Integration
Insert Change Process
1
Keep spindle in machine
No need to remove the shank body. Insert change is performed in-machine with minimal disruption.
2
Use T10 Torx key
Loosen the single clamping screw counterclockwise until the insert releases from the pocket.
3
Swap insert
Seat the new HCD-21.0-21.9 insert firmly into the pocket. Verify seating before tightening.
4
Torque to spec
Tighten the clamping screw to the specified torque. Do not overtighten — this prevents pocket wear.
Shank Compatibility
HCD-21.0-21.9 Fits These Shanks
One insert code — four depth ratios. Select the shank that matches your hole depth requirement.
Order HCD-21.0-21.9 Today
Factory direct. MOQ 1 piece. Also need a shank body? Order both together for a complete system.