2-Flute · Uncoated · R1.5mm Ball · Aluminium · Standard Reach
3mm 2-Flute Uncoated Solid Carbide Ball Nose End Millfor Aluminium & Non-Ferrous 3D Surface Machining
Uncoated (bright-polished) ball nose end mills with 2 flutes are specifically optimised for high-speed 3D contouring in aluminium alloys, copper, graphite, and soft non-ferrous materials. The mirror-polished flute surface prevents built-up edge (BUE) that can degrade surface finish in soft metals. Large chip gullets ensure complete swarf evacuation even at spindle speeds above 20,000 RPM. Ideal for electrode machining (EDM graphite) and aluminium aerospace structural components.
Get Pricing & Stock
Reference price
$7.69
Ref. factory price (USD)
Based on rod stock cost as of 2026-03-31. Final quotation may differ.
R1.5mm 2F Uncoated Ball Nose EM
L2 8mm · D2 4mm · OAL 50mm
Standard Reach · Aluminium
✓ Factory direct pricing
✓ MOQ 1 piece, ships 1–5 days
✓ Custom ball radii available
Full Dimensions
Technical Specifications
| Ball Radius (R) | 1.5 mm |
| Cutter Diameter (D1 h7) | 3 mm |
| Flute Length (L2) | 8 mm |
| Shank Diameter (D2 h6) | 4 mm |
| Overall Length (L1) | 50 mm |
| Number of Flutes | 2 |
| End Geometry | Ball Nose (Spherical) |
| Coating | Uncoated Bright polished |
| Max Material Hardness | N/A (non-ferrous optimised) |
| Reach Category | Standard (L1/D1 = 16.7×) |
| Substrate | K10/K20 Ultra-Fine Grain Carbide |
| Shank Tolerance | h6 |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
| Lead Time (custom) | 5–15 business days |
Uncoated · 2 Flute · Aluminium
Where This Tool Excels
R1.5mm Uncoated 2F — Recommended Applications
- ▸Micro-mould texture and fine engraving
- ▸Medical implant surface contouring
- ▸Watch case and jewellery component 3D finishing
- ▸Electrode finishing for micro-EDM
3D Finishing Reference
Scallop Height vs Step-Over — R1.5mm
Residual scallop height (cusps) between adjacent tool paths, calculated for R1.5mm ball nose:
| Step-Over | Step-Over mm | Scallop Height (µm) | Typical Ra (µm) |
|---|---|---|---|
| 2% D1 | 0.06 | 0.3 | ≈ 0.06 |
| 5% D1 | 0.15 | 1.9 | ≈ 0.38 |
| 8% D1 | 0.24 | 4.8 | ≈ 0.96 |
| 10% D1 | 0.30 | 7.5 | ≈ 1.50 |
| 15% D1 | 0.45 | 17.0 | ≈ 3.39 |
| 20% D1 | 0.60 | 30.3 | ≈ 6.06 |
h = R − √(R² − (ae/2)²). Actual Ra depends on feed rate, chip load, and material.
Coating Performance
Uncoated — Why It Works for Ball-End Machining
- ▸Mirror-polished flute — zero aluminium adhesion on ball profile
- ▸Eliminates built-up edge (BUE) during high-speed aluminium contouring
- ▸Large chip gullets for clean swarf evacuation at 20,000+ RPM
- ▸Ideal for graphite electrode and EDM insert 3D profiles
- ▸Use with air blast or light oil mist — no flood coolant needed
Related Ball Nose Variants
Same Size in Other Coatings
Order R1.5mm 2-Flute Uncoated Ball Nose Today
Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.