4-Flute · nACo · R2mm · HRC65 · Standard Reach

8mm 4-Flute R2mm nACo Solid Carbide Corner Radius End Millfor HRC65 Hardened Steel

Name: 8mm 4-Flute R2mm nACo Corner Radius End Mill for HRC65
Brand: Solid Carbide Direct
SKU: SCD-CREM-NACO-4F-D8-R2-L30
Price: 85.71 USD
Availability: InStock

nACo (nano-AlCrN composite) corner radius end mills deliver the highest performance tier for hard milling in die steel, tool steel, and hardened components up to HRC65. The corner radius geometry is especially critical at high hardness — it eliminates the notching failure mode that destroys sharp-corner tools in hardened steel. Combined with nACo's 3,800 HV hardness and 1,100°C oxidation resistance, this tool enables dry semi-finish and finish passes in H13, P20, D2, and S7 mould steel directly after heat treatment.

R2mmD1 8mmL2 30mmD2 8mmOAL 150mm4 FlutesnACoHRC65Standard ReachMOQ 1 pc

Get Pricing & Stock

Reference price

$85.71

Ref. factory price (USD)

Based on rod stock cost as of 2026-03-31. Final quotation may differ.

8mm 4F R2mm nACo

L2 30mm · D2 8mm · OAL 150mm

Standard Reach · HRC65

WhatsApp Quote Email RFQ Use contact form →

✓ Factory direct pricing

✓ MOQ 1 piece, ships 1–5 days

✓ Custom radius in 0.1mm increments

Full Dimensions

Technical Specifications

Corner Radius	2 mm
Cutter Diameter (D1 h7)	8 mm
Flute Length (L2)	30 mm
Shank Diameter (D2 h6)	8 mm
Overall Length (L1)	150 mm
Number of Flutes	4
End Geometry	Corner Radius (Bull Nose)
Coating	nACo Nano-AlCrN composite
Max Material Hardness	HRC65
Reach Category	Standard (L1/D1 = 18.8×)
Helix Angle	30°–35°
Substrate	K10/K20 Ultra-Fine Grain Carbide
Shank Tolerance	h6
MOQ	1 piece
Lead Time (standard)	1–5 business days
Lead Time (custom)	5–15 business days

nACo · 4 Flute · HRC65 · R2mm

Corner R

2mm

D1 h7

8mm

30mm

D2 h6

8mm

150mm

Reach

Standard

R2mm Corner Geometry

Heavy-corner fillet for energy, marine, and structural components

▸Produces R2mm fillets without interpolation — direct plunge-to-shoulder possible
▸Widely used in wind turbine nacelle components and frame pockets
▸Reduces stress concentration on R2mm structural fillets vs machined-in ball nose
▸Long-reach variants for deep pocket access (L1 up to 150mm)

Radius Selection Tip: R2mm at this tool diameter means a significant portion of the cutting edge is curved. In HRC65 steel, reduce feed rate 10–15% vs R1mm to maintain consistent chip load across the radius. Trochoidal milling strategies work well for R2mm pocketing.

ø8mm Applications

8mm nACo — Where This Tool Fits

▸Automotive component shoulder milling
▸Pump body and valve pocket features
▸Gearbox cover profiling
▸Large mould runner channel machining

Machining Tip: ø8mm is the production sweet spot for corner radius end mills. In HRC65 steel, radial engagement can be 30–50% of D for profiling, with DOC up to 1×D for semi-finish passes. The corner radius reduces chatter significantly at this diameter.

Coating Performance

nACo on Corner Radius Geometry

▸nACo hardness > 3,800 HV — critical for corner edge stability in HRC65 steel
▸Oxidation to 1,100°C — supports dry cutting in deep die pockets
▸Corner radius + nACo eliminates notching failure common in hard milling
▸Enables direct finish after heat treatment — skip grinding on mould steel

ISO HISO PnACo corner radius end mill HRC654 flute bull nose end mill hardened steelcorner radius carbide end mill hard millingradius end mill die steel HRC65

Same Diameter & Radius, Different Reach