KY TOOLS / General Series

General Series — Carbide End Mills

TiSiN PVD-coated carbide end mills for general milling, with square, ball nose, corner radius, long-neck and roughing profiles.

Choose a Tool ProfileDownload CatalogRequest a Quote

Choose a Tool Profile

6 / Tool Profiles

4 Flutes · Square End Mills

Ø1–20 mm · 35°
General Series — 4 Flutes · Square End Mills
  • Si-based TiSiN PVD coating for good wear resistance.
  • High-precision cutting-edge tolerance.
  • Reinforced cutting edges help prevent chipping.
  • Fine-grain WC (0.8 μm) with high TRS helps minimize breakage.
View Drawing4 Flutes · Square End Mills — D, FL, OAL, R

Standard Dimensions · mm

Request a Quote
General Series — 4 Flutes · Square End Mills
DCutting diameterFLFlute lengthOALOverall lengthdShank diameterRequest a Quote
13504Request a Quote
25504Request a Quote
38504Request a Quote
410504Request a Quote
420754Request a Quote
4251004Request a Quote
513506Request a Quote
615506Request a Quote
625756Request a Quote
6301006Request a Quote
6301506Request a Quote
820608Request a Quote
825758Request a Quote
8351008Request a Quote
8401508Request a Quote
10257510Request a Quote
104010010Request a Quote
105015010Request a Quote
12307512Request a Quote
124510012Request a Quote
126015012Request a Quote
14358014Request a Quote
144510014Request a Quote
146015014Request a Quote
164510016Request a Quote
166015016Request a Quote
184510018Request a Quote
186015018Request a Quote
204510020Request a Quote
206015020Request a Quote

2 Flutes · Square End Mills

Ø1–20 mm · 35°
General Series — 2 Flutes · Square End Mills
  • Si-based TiSiN PVD coating for good wear resistance.
  • High-precision cutting-edge tolerance.
  • Reinforced cutting edges help prevent chipping.
  • Fine-grain WC (0.8 μm) with high TRS helps minimize breakage.
View Drawing2 Flutes · Square End Mills — D, FL, OAL, R

Standard Dimensions · mm

Request a Quote
General Series — 2 Flutes · Square End Mills
DCutting diameterFLFlute lengthOALOverall lengthdShank diameterRequest a Quote
13504Request a Quote
25504Request a Quote
38504Request a Quote
410504Request a Quote
420754Request a Quote
4251004Request a Quote
513506Request a Quote
615506Request a Quote
625756Request a Quote
6301006Request a Quote
6301506Request a Quote
820608Request a Quote
825758Request a Quote
8351008Request a Quote
8401508Request a Quote
10257510Request a Quote
104010010Request a Quote
105015010Request a Quote
12307512Request a Quote
124510012Request a Quote
126015012Request a Quote
14358014Request a Quote
144510014Request a Quote
146015014Request a Quote
164510016Request a Quote
166015016Request a Quote
184510018Request a Quote
186015018Request a Quote
204510020Request a Quote
206015020Request a Quote

2 Flutes · Ball Nose End Mills

Ø1–20 mm · 35°
General Series — 2 Flutes · Ball Nose End Mills
  • Si-based TiSiN PVD coating for good wear resistance.
  • High-precision cutting-edge tolerance.
  • Reinforced cutting edges help prevent chipping.
  • Fine-grain WC (0.8 μm) with high TRS helps minimize breakage.
Specifications

R 0.5–2.5 mm: ±0.005 mm

R 3–10 mm: ±0.01 mm

View Drawing2 Flutes · Ball Nose End Mills — D, FL, OAL, R

Standard Dimensions · mm

Request a Quote
General Series — 2 Flutes · Ball Nose End Mills
DCutting diameterRRFLFlute lengthOALOverall lengthdShank diameterRequest a Quote
10.53504Request a Quote
215504Request a Quote
31.58504Request a Quote
4210504Request a Quote
4220754Request a Quote
42251004Request a Quote
52.513506Request a Quote
6315506Request a Quote
6325756Request a Quote
63301006Request a Quote
63301506Request a Quote
8420608Request a Quote
8425758Request a Quote
84351008Request a Quote
84401508Request a Quote
105257510Request a Quote
1054010010Request a Quote
1055015010Request a Quote
126307512Request a Quote
1264510012Request a Quote
1266015012Request a Quote
147358014Request a Quote
1474510014Request a Quote
1476015014Request a Quote
1684510016Request a Quote
1686015016Request a Quote
1894510018Request a Quote
1896015018Request a Quote
20104510020Request a Quote
20106015020Request a Quote

4 Flutes · Bull Nose End Mills

Ø1–20 mm · 35°
General Series — 4 Flutes · Bull Nose End Mills
  • Si-based TiSiN PVD coating for good wear resistance.
  • High-precision cutting-edge tolerance.
  • Reinforced cutting edges help prevent chipping.
  • Fine-grain WC (0.8 μm) with high TRS helps minimize breakage.
Specifications

R 0.02–0.5 mm: ±0.005 mm

R 1–1.5 mm: ±0.01 mm

R 2–5 mm: ±0.015 mm

View Drawing4 Flutes · Bull Nose End Mills — D, FL, OAL, R

Standard Dimensions · mm

Request a Quote
General Series — 4 Flutes · Bull Nose End Mills
DCutting diameterRRFLFlute lengthOALOverall lengthdShank diameterRequest a Quote
10.23504Request a Quote
20.2 / 0.55504Request a Quote
30.2 / 0.58504Request a Quote
40.2 / 0.5 / 110504Request a Quote
40.2 / 0.5 / 120754Request a Quote
40.2 / 0.5 / 1251004Request a Quote
50.2 / 0.5 / 113506Request a Quote
60.2 / 0.5 / 115506Request a Quote
60.2 / 0.5 / 125756Request a Quote
60.2 / 0.5 / 1301006Request a Quote
60.2 / 0.5 / 1301506Request a Quote
80.2 / 0.5 / 1 / 220608Request a Quote
80.2 / 0.5 / 1 / 225758Request a Quote
80.2 / 0.5 / 1 / 2351008Request a Quote
80.2 / 0.5 / 1 / 2401508Request a Quote
100.5 / 1 / 2 / 3257510Request a Quote
100.5 / 1 / 2 / 34010010Request a Quote
100.5 / 1 / 2 / 35015010Request a Quote
120.5 / 1 / 2 / 3307512Request a Quote
120.5 / 1 / 2 / 34510012Request a Quote
120.5 / 1 / 2 / 36015012Request a Quote
140.5 / 1 / 2358014Request a Quote
140.5 / 1 / 24510014Request a Quote
140.5 / 1 / 26015014Request a Quote
160.5 / 1 / 24510016Request a Quote
160.5 / 1 / 26015016Request a Quote
180.5 / 1 / 24510018Request a Quote
180.5 / 1 / 26015018Request a Quote
200.5 / 1 / 24510020Request a Quote
200.5 / 1 / 26015020Request a Quote

2 Flutes · Long Neck End Mills

Ø0.6–5 mm · 35° · Shank diameter h6
General Series — 2 Flutes · Long Neck End Mills
  • Si-based TiSiN PVD coating for good wear resistance.
  • High-precision cutting-edge tolerance.
  • Reinforced cutting edges help prevent chipping.
  • Fine-grain WC (0.8 μm) with high TRS helps minimize breakage.
Specifications

R 0.5–2.5 mm: ±0.005 mm

Standard Dimensions · mm

Request a Quote
General Series — 2 Flutes · Long Neck End Mills
DCutting diameterRRFLFlute lengthL2Reach lengthd2Neck diameterOALOverall lengthdShank diameterRequest a Quote
0.60.30.53 / 40.55504Request a Quote
0.80.40.74 / 60.75504Request a Quote
10.50.94 / 6 / 80.950 / 604Request a Quote
1.50.751.26 / 81.450 / 604Request a Quote
211.68 / 101.950 / 604Request a Quote
31.52.410 / 12 / 162.9606Request a Quote
423.212 / 163.9606Request a Quote
423.2253.9756Request a Quote
52.54164.860 / 756Request a Quote

Lengths separated by / are alternative options. Confirm the required reach and overall length together when requesting a quotation.

3 / 4 / 5 Flutes · Roughing End Mills

Ø4–20 mm · 45° · Shank diameter h5
General Series — 3 / 4 / 5 Flutes · Roughing End Mills
  • Si-based TiSiN PVD coating for good wear resistance.
  • High-precision cutting-edge tolerance.
  • Reinforced cutting edges help prevent chipping.
  • Fine-grain WC (0.8 μm) with high TRS helps minimize breakage.
Specifications

R 0.02–0.5 mm: ±0.005 mm

R 1–1.5 mm: ±0.01 mm

R 2–5 mm: ±0.015 mm

View Drawing3 / 4 / 5 Flutes · Roughing End Mills — D, FL, OAL, R

Standard Dimensions · mm

Request a Quote
General Series — 3 / 4 / 5 Flutes · Roughing End Mills
DCutting diameterRRFLFlute lengthL2Reach lengthOALOverall lengthdShank diameterZFlutesRequest a Quote
40.210—5063Request a Quote
60.210206064Request a Quote
60.513—6064Request a Quote
80.212257084Request a Quote
8119—7084Request a Quote
100.3153075104Request a Quote
10122—75104Request a Quote
120.3203580124Request a Quote
12126—80124Request a Quote
160.532—100165Request a Quote
161.532—100165Request a Quote
200.538—100205Request a Quote
20238—100205Request a Quote

Request a Quote — General Series

Send your work material and hardness, profile, cutting diameter, flute length, reach, coating, quantity and annual demand. Include radius and inspection requirements where applicable. Price, order quantity and delivery are confirmed for your specification.

Request a QuoteEnd Mills / OEM →

FROM OUR WORKSHOP

Watch us grind and inspect our tools

Two videos filmed in our workshop: CNC tool grinding and dimensional inspection.

CNC grinding: end mills, drills & special cutters

See how we use a CNC grinder to make carbide end mills, drills and special cutters.

Watch on YouTube

Measuring carbide end mills at 0.001 mm

Watch our ZOLLER inspection process for precision carbide end mills.

Watch on YouTube