4-Flute · TiSiN · R1mm · HRC55 · Standard Reach
5mm 4-Flute R1mm TiSiN Solid Carbide Corner Radius End Millfor HRC55 Steel & Stainless
TiSiN-coated 4-flute corner radius end mills combine the rigidity of a square end mill with corner geometry that reduces stress concentration and micro-chipping on hardened surfaces up to HRC55. The corner radius distributes cutting load across a wider arc at entry, dramatically extending tool life versus sharp-corner tools in steel and stainless steel shoulder milling and semi-finish passes. TiSiN hardness > 3,500 HV resists abrasion at continuous contact conditions.
Get Pricing & Stock
Richtpreis
20,30 €
Richtpreis Werk (EUR)
Basierend auf Stabmaterial-Stand per 2026-03-31. Endgültiges Angebot kann abweichen.
5mm 4F R1mm TiSiN
L2 25mm · D2 5mm · OAL 100mm
Standard Reach · HRC55
✓ Factory direct pricing
✓ MOQ 1 piece, ships 1–5 days
✓ Custom radius in 0.1mm increments
Full Dimensions
Technical Specifications
| Corner Radius | 1 mm |
| Cutter Diameter (D1 h7) | 5 mm |
| Flute Length (L2) | 25 mm |
| Shank Diameter (D2 h6) | 5 mm |
| Overall Length (L1) | 100 mm |
| Number of Flutes | 4 |
| End Geometry | Corner Radius (Bull Nose) |
| Coating | TiSiN Titanium Silicon Nitride |
| Max Material Hardness | HRC55 |
| Reach Category | Standard (L1/D1 = 20.0×) |
| Helix Angle | 30°–35° |
| Substrate | K10/K20 Ultra-Fine Grain Carbide |
| Shank Tolerance | h6 |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
| Lead Time (custom) | 5–15 business days |
TiSiN · 4 Flute · HRC55 · R1mm
R1mm Corner Geometry
General-purpose fillet milling — strongest corner geometry for heavy passes
- ▸Maximum radial support on cutting edge during heavy DOC passes
- ▸Ideal for semi-finish passes before a smaller-radius finishing pass
- ▸Produces clean R1mm fillets in one pass — no secondary operation
- ▸Recommended for die cast tooling, injection mould cores, and structural pockets
ø5mm Applications
5mm TiSiN — Where This Tool Fits
- ▸Mould cavity pocket semi-finishing
- ▸Precision aerospace part profiling
- ▸Hydraulic manifold pocket corners
- ▸Small fixture and jig features
Coating Performance
TiSiN on Corner Radius Geometry
- ▸TiSiN hardness > 3,500 HV on curved corner arc geometry
- ▸Prevents micro-chipping at re-entry in interrupted shoulder milling
- ▸Low friction for reduced built-up edge in stainless steel shoulder cuts
- ▸Dry, MQL, or flood coolant — all environments supported
Same Diameter & Radius, Different Reach
ø5mm R1mm TiSiN · 4 Flute · HRC55 — Other Flute Lengths
Same ø5mm Diameter, Other Radii
TiSiN · 4 Flute · HRC55 — Other Corner Radii at ø5mm
Same Dimensions, Other Coatings
ø5mm R1mm / L2 25mm — Other Variants
Order 5mm R1mm 4-Flute TiSiN Today
Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.