4-Flute · TiSiN · R0.2mm · HRC55 · Standard Reach

6mm 4-Flute R0.2mm TiSiN Solid Carbide Corner Radius End Millfor HRC55 Steel & Stainless

TiSiN-coated 4-flute corner radius end mills combine the rigidity of a square end mill with corner geometry that reduces stress concentration and micro-chipping on hardened surfaces up to HRC55. The corner radius distributes cutting load across a wider arc at entry, dramatically extending tool life versus sharp-corner tools in steel and stainless steel shoulder milling and semi-finish passes. TiSiN hardness > 3,500 HV resists abrasion at continuous contact conditions.

R0.2mmD1 6mmL2 15mmD2 6mmOAL 50mm4 FlutesTiSiNHRC55Standard ReachMOQ 1 pc

Get Pricing & Stock

Cena referencyjna

61,49 zł

Cena ref. fabryki (PLN)

wg kosztu pręta na 2026-03-31. Wycena końcowa może się różnić.

TiSiN · 4 Flute · HRC55

6mm 4F R0.2mm TiSiN

L2 15mm · D2 6mm · OAL 50mm

Standard Reach · HRC55

WhatsApp Quote Email RFQUse contact form →

✓ Factory direct pricing

✓ MOQ 1 piece, ships 1–5 days

✓ Custom radius in 0.1mm increments

Full Dimensions

Technical Specifications

Corner Radius0.2 mm
Cutter Diameter (D1 h7)6 mm
Flute Length (L2)15 mm
Shank Diameter (D2 h6)6 mm
Overall Length (L1)50 mm
Number of Flutes4
End GeometryCorner Radius (Bull Nose)
CoatingTiSiN Titanium Silicon Nitride
Max Material HardnessHRC55
Reach CategoryStandard (L1/D1 = 8.3×)
Helix Angle30°–35°
SubstrateK10/K20 Ultra-Fine Grain Carbide
Shank Toleranceh6
MOQ1 piece
Lead Time (standard)1–5 business days
Lead Time (custom)5–15 business days

TiSiN · 4 Flute · HRC55 · R0.2mm

6mm 4-flute R0.2mm TiSiN corner radius end mill — L2=15mm OAL=50mm
Corner R
0.2mm
D1 h7
6mm
L2
15mm
D2 h6
6mm
L1
50mm
Reach
Standard

R0.2mm Corner Geometry

Micro edge protection — minimal corner rounding for near-sharp corner features

  • ▸Virtually sharp corner appearance while eliminating micro-chipping
  • ▸Ideal where fillet radius tolerance is ± 0.05mm
  • ▸Extends tool life vs true sharp-corner tools by 30–50%
  • ▸Suitable for precision mould parting surfaces and embossed lettering
Radius Selection Tip: R0.2mm is the tightest corner radius standard. In HRC55 steel, the R0.2mm arc is small enough to appear visually sharp but prevents the notching failure that destroys zero-radius tools. Use identical step-over and depth parameters as you would for a square end mill.

ø6mm Applications

6mm TiSiN — Where This Tool Fits

  • ▸Mould cavity pocket semi-finishing
  • ▸Precision aerospace part profiling
  • ▸Hydraulic manifold pocket corners
  • ▸Small fixture and jig features
Machining Tip: ø6mm with corner radius provides the best size-to-stiffness ratio for die and mould work. In HRC55 steel, the corner radius allows 3–5×D axial depth without the micro-chipping that limits sharp-corner tools. Ideal for continuous shoulder milling passes.

Coating Performance

TiSiN on Corner Radius Geometry

  • ▸TiSiN hardness > 3,500 HV on curved corner arc geometry
  • ▸Prevents micro-chipping at re-entry in interrupted shoulder milling
  • ▸Low friction for reduced built-up edge in stainless steel shoulder cuts
  • ▸Dry, MQL, or flood coolant — all environments supported
ISO PISO MISO KTiSiN corner radius end mill4 flute bull nose end mill HRC55corner radius carbide end mill steelradius end mill semi-finish milling

Same Diameter & Radius, Different Reach

ø6mm R0.2mm TiSiN · 4 Flute · HRC55 — Other Flute Lengths

L2 20mm
OAL 75mm · Standard
L2 30mm
OAL 100mm · Standard

Same ø6mm Diameter, Other Radii

TiSiN · 4 Flute · HRC55 — Other Corner Radii at ø6mm

R0.3mm
L2 15mm
R0.5mm
L2 15mm
R1mm
L2 15mm
R1.5mm
L2 15mm
R2mm
L2 15mm
R2.5mm
L2 15mm

Same Dimensions, Other Coatings

ø6mm R0.2mm / L2 15mm — Other Variants

nACo · 4 Flute · HRC65
nACo · 4 Flute · HRC65
HRC65 · 4F · R0.2mm
Uncoated · 4 Flute · Aluminium
Uncoated · 4 Flute · Aluminium
Non-Ferrous · 4F · R0.2mm
ø4mm R0.2mm / L2 20mm← All Corner Radius End Millsø6mm R0.2mm / L2 20mm

Order 6mm R0.2mm 4-Flute TiSiN Today

Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.

WhatsApp NowContact Form