4-Flute · TiSiN · R2.5mm · HRC55 · Standard Reach

6mm 4-Flute R2.5mm TiSiN Solid Carbide Corner Radius End Millfor HRC55 Steel & Stainless

TiSiN-coated 4-flute corner radius end mills combine the rigidity of a square end mill with corner geometry that reduces stress concentration and micro-chipping on hardened surfaces up to HRC55. The corner radius distributes cutting load across a wider arc at entry, dramatically extending tool life versus sharp-corner tools in steel and stainless steel shoulder milling and semi-finish passes. TiSiN hardness > 3,500 HV resists abrasion at continuous contact conditions.

R2.5mmD1 6mmL2 15mmD2 6mmOAL 50mm4 FlutesTiSiNHRC55Standard ReachMOQ 1 pc

Get Pricing & Stock

Cena referencyjna

61,49 zł

Cena ref. fabryki (PLN)

wg kosztu pręta na 2026-03-31. Wycena końcowa może się różnić.

TiSiN · 4 Flute · HRC55

6mm 4F R2.5mm TiSiN

L2 15mm · D2 6mm · OAL 50mm

Standard Reach · HRC55

WhatsApp Quote Email RFQUse contact form →

✓ Factory direct pricing

✓ MOQ 1 piece, ships 1–5 days

✓ Custom radius in 0.1mm increments

Full Dimensions

Technical Specifications

Corner Radius2.5 mm
Cutter Diameter (D1 h7)6 mm
Flute Length (L2)15 mm
Shank Diameter (D2 h6)6 mm
Overall Length (L1)50 mm
Number of Flutes4
End GeometryCorner Radius (Bull Nose)
CoatingTiSiN Titanium Silicon Nitride
Max Material HardnessHRC55
Reach CategoryStandard (L1/D1 = 8.3×)
Helix Angle30°–35°
SubstrateK10/K20 Ultra-Fine Grain Carbide
Shank Toleranceh6
MOQ1 piece
Lead Time (standard)1–5 business days
Lead Time (custom)5–15 business days

TiSiN · 4 Flute · HRC55 · R2.5mm

6mm 4-flute R2.5mm TiSiN corner radius end mill — L2=15mm OAL=50mm
Corner R
2.5mm
D1 h7
6mm
L2
15mm
D2 h6
6mm
L1
50mm
Reach
Standard

R2.5mm Corner Geometry

Maximum standard corner radius — structural fillet finishing and heavy pocketing

  • ▸Largest standard corner radius for high-load structural pockets
  • ▸One tool for both side wall and corner fillet in a single pass
  • ▸Reduces fillet machining time vs interpolated ball-nose strategy
  • ▸Suitable for oil & gas, aerospace, and heavy equipment components
Radius Selection Tip: R2.5mm requires careful feeds and speeds management — the curved cutting edge geometry changes effective rake angle significantly across the arc. In HRC55 steel, use conservative feed (60–70% of square end mill equivalent) until material behaviour is confirmed.

ø6mm Applications

6mm TiSiN — Where This Tool Fits

  • ▸Mould cavity pocket semi-finishing
  • ▸Precision aerospace part profiling
  • ▸Hydraulic manifold pocket corners
  • ▸Small fixture and jig features
Machining Tip: ø6mm with corner radius provides the best size-to-stiffness ratio for die and mould work. In HRC55 steel, the corner radius allows 3–5×D axial depth without the micro-chipping that limits sharp-corner tools. Ideal for continuous shoulder milling passes.

Coating Performance

TiSiN on Corner Radius Geometry

  • ▸TiSiN hardness > 3,500 HV on curved corner arc geometry
  • ▸Prevents micro-chipping at re-entry in interrupted shoulder milling
  • ▸Low friction for reduced built-up edge in stainless steel shoulder cuts
  • ▸Dry, MQL, or flood coolant — all environments supported
ISO PISO MISO KTiSiN corner radius end mill4 flute bull nose end mill HRC55corner radius carbide end mill steelradius end mill semi-finish milling

Same ø6mm Diameter, Other Radii

TiSiN · 4 Flute · HRC55 — Other Corner Radii at ø6mm

R0.2mm
L2 15mm
R0.3mm
L2 15mm
R0.5mm
L2 15mm
R1mm
L2 15mm
R1.5mm
L2 15mm
R2mm
L2 15mm

Same Dimensions, Other Coatings

ø6mm R2.5mm / L2 15mm — Other Variants

nACo · 4 Flute · HRC65
nACo · 4 Flute · HRC65
HRC65 · 4F · R2.5mm
Uncoated · 4 Flute · Aluminium
Uncoated · 4 Flute · Aluminium
Non-Ferrous · 4F · R2.5mm
ø16mm R2mm / L2 45mm← All Corner Radius End Millsø10mm R2.5mm / L2 25mm

Order 6mm R2.5mm 4-Flute TiSiN Today

Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.

WhatsApp NowContact Form