4-Flute · TiSiN · R9mm Ball · HRC55 · Standard Reach
18mm 4-Flute TiSiN Solid Carbide Ball Nose End Millfor HRC55 3D Contouring & Mould Work
The 4-flute TiSiN ball nose end mill is engineered for finishing passes and semi-finish Z-level contouring in steel and stainless steel up to HRC55. More cutting edges reduce per-tooth chip load, enabling higher feed rates while maintaining lower surface scallop height (Ra). TiSiN coating withstands the elevated temperatures of continuous 3D contouring on hardened mould surfaces without edge chipping.
Get Pricing & Stock
Cena referencyjna
1524,72 zł
Cena ref. fabryki (PLN)
wg kosztu pręta na 2026-03-31. Wycena końcowa może się różnić.
R9mm 4F TiSiN Ball Nose EM
L2 70mm · D2 18mm · OAL 150mm
Standard Reach · HRC55
✓ Factory direct pricing
✓ MOQ 1 piece, ships 1–5 days
✓ Custom ball radii available
Full Dimensions
Technical Specifications
| Ball Radius (R) | 9 mm |
| Cutter Diameter (D1 h7) | 18 mm |
| Flute Length (L2) | 70 mm |
| Shank Diameter (D2 h6) | 18 mm |
| Overall Length (L1) | 150 mm |
| Number of Flutes | 4 |
| End Geometry | Ball Nose (Spherical) |
| Coating | TiSiN Titanium Silicon Nitride |
| Max Material Hardness | HRC55 |
| Reach Category | Standard (L1/D1 = 8.3×) |
| Substrate | K10/K20 Ultra-Fine Grain Carbide |
| Shank Tolerance | h6 |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
| Lead Time (custom) | 5–15 business days |
TiSiN · 4 Flute · HRC55
Where This Tool Excels
R9mm TiSiN 4F — Recommended Applications
- ▸Heavy mould base 3D contouring
- ▸Large stamping and forming die profiling
- ▸Marine propeller and impeller blade finishing
- ▸Power generation turbine component contouring
3D Finishing Reference
Scallop Height vs Step-Over — R9mm
Residual scallop height (cusps) between adjacent tool paths, calculated for R9mm ball nose:
| Step-Over | Step-Over mm | Scallop Height (µm) | Typical Ra (µm) |
|---|---|---|---|
| 2% D1 | 0.36 | 1.8 | ≈ 0.36 |
| 5% D1 | 0.90 | 11.3 | ≈ 2.25 |
| 8% D1 | 1.44 | 28.8 | ≈ 5.77 |
| 10% D1 | 1.80 | 45.1 | ≈ 9.02 |
| 15% D1 | 2.70 | 101.8 | ≈ 20.37 |
| 20% D1 | 3.60 | 181.8 | ≈ 36.37 |
h = R − √(R² − (ae/2)²). Actual Ra depends on feed rate, chip load, and material.
Coating Performance
TiSiN — Why It Works for Ball-End Machining
- ▸TiSiN hardness > 3,500 HV — superior to TiAlN on ball-end profiles
- ▸Low friction reduces heat at ball-tip during 3D contouring
- ▸Suitable for dry, MQL, or flood coolant environments
- ▸4-flute: lower scallop height per pass for finishing operations
Related Ball Nose Variants
Same Size in Other Coatings
Same Ball Radius, Different Reach
R9mm TiSiN · 4 Flute · HRC55 — Other Flute Lengths
Order R9mm 4-Flute TiSiN Ball Nose Today
Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.