4-Flute · TiSiN · R4mm Ball · HRC55 · Standard Reach
8mm 4-Flute TiSiN Solid Carbide Ball Nose End Millfor HRC55 3D Contouring & Mould Work
The 4-flute TiSiN ball nose end mill is engineered for finishing passes and semi-finish Z-level contouring in steel and stainless steel up to HRC55. More cutting edges reduce per-tooth chip load, enabling higher feed rates while maintaining lower surface scallop height (Ra). TiSiN coating withstands the elevated temperatures of continuous 3D contouring on hardened mould surfaces without edge chipping.
Get Pricing & Stock
Cena referencyjna
158,89 zł
Cena ref. fabryki (PLN)
wg kosztu pręta na 2026-03-31. Wycena końcowa może się różnić.
R4mm 4F TiSiN Ball Nose EM
L2 25mm · D2 8mm · OAL 75mm
Standard Reach · HRC55
✓ Factory direct pricing
✓ MOQ 1 piece, ships 1–5 days
✓ Custom ball radii available
Full Dimensions
Technical Specifications
| Ball Radius (R) | 4 mm |
| Cutter Diameter (D1 h7) | 8 mm |
| Flute Length (L2) | 25 mm |
| Shank Diameter (D2 h6) | 8 mm |
| Overall Length (L1) | 75 mm |
| Number of Flutes | 4 |
| End Geometry | Ball Nose (Spherical) |
| Coating | TiSiN Titanium Silicon Nitride |
| Max Material Hardness | HRC55 |
| Reach Category | Standard (L1/D1 = 9.4×) |
| Substrate | K10/K20 Ultra-Fine Grain Carbide |
| Shank Tolerance | h6 |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
| Lead Time (custom) | 5–15 business days |
TiSiN · 4 Flute · HRC55
Where This Tool Excels
R4mm TiSiN 4F — Recommended Applications
- ▸Large mould cavity semi-finish and finish passes
- ▸Automotive stamping die contouring
- ▸Compound curve aerospace structural parts
- ▸Forging die cavity profiling
3D Finishing Reference
Scallop Height vs Step-Over — R4mm
Residual scallop height (cusps) between adjacent tool paths, calculated for R4mm ball nose:
| Step-Over | Step-Over mm | Scallop Height (µm) | Typical Ra (µm) |
|---|---|---|---|
| 2% D1 | 0.16 | 0.8 | ≈ 0.16 |
| 5% D1 | 0.40 | 5.0 | ≈ 1.00 |
| 8% D1 | 0.64 | 12.8 | ≈ 2.56 |
| 10% D1 | 0.80 | 20.1 | ≈ 4.01 |
| 15% D1 | 1.20 | 45.3 | ≈ 9.05 |
| 20% D1 | 1.60 | 80.8 | ≈ 16.16 |
h = R − √(R² − (ae/2)²). Actual Ra depends on feed rate, chip load, and material.
Coating Performance
TiSiN — Why It Works for Ball-End Machining
- ▸TiSiN hardness > 3,500 HV — superior to TiAlN on ball-end profiles
- ▸Low friction reduces heat at ball-tip during 3D contouring
- ▸Suitable for dry, MQL, or flood coolant environments
- ▸4-flute: lower scallop height per pass for finishing operations
Related Ball Nose Variants
Same Size in Other Coatings
Same Ball Radius, Different Reach
R4mm TiSiN · 4 Flute · HRC55 — Other Flute Lengths
Order R4mm 4-Flute TiSiN Ball Nose Today
Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.